Our mission is to provide professionally trained Civil Engineers for all type of civil engineering services. Increase the supply of efficient & highly skilled Civil Engineers and serve the Civil Engineering Community.
Read MoreP-way Design involves the design, construction, operation and maintenance of Light Rail Transit (LRT), Heavy Rail Transit (MRT) and Highspeed Rail (Bullet Trains) to ensure safe and effective transportation of people and goods. The course modules share P-way or LRT Design in a detailed manner. The course has covered key industry of P-Way Design, Elements of P-Way such as LRV Bumpers, vehicle dynamic envelops, etc. The course module the design process track, horizontal design, vertical design, superelevation, the speed at curves, and track components, etc. The course also covers different type of Track Forms such as Ballasted Track Forms, Embedded Tracks. Along with this, the course covers key features of Tram Stop, type of stops, surface finish, etc. In the First Module, we have commenced the course with the key industry of P-Way Design. The module then explained the features of Tram like LRV vehicles, pantographs, crash energy management (CEM), LRV Bumpers, vehicle dynamic envelopes, platform clearance, etc. In the Second Module, we have described Track horizontal design and covers link and curve section design, superelevation or cant deficiency and superelevation unbalance. The course module has also described how to define the speed of LRT Track at curves and the categories of speed at curves such as overturning speed, safe speed, maximum authorised speed and signal speed. In the third module, we have described Track vertical alignment design and covers vertical gradient, crest curves, sag curves design along with design guidelines and design formulas. Thereafter, the module has described trackwork component such as Turnouts, Crossovers, Switches, Cross-Rails, Frogs, check-rails, and Pocket Tracks. In the fourth module, we have described LRT Track forms, stiffness of track, and track modulus. Thereafter, the modules have described various Track forms such as Ballasted Track, Direct Fix Track, Embedded Track, Floating Track and Tracks in the transition zone. The module has also covered various forms of Track Sleepers such as Timber Sleeper and Pre-cast concrete sleepers. The module described the formula to determine the spacing and factors of the sleepers that affect sleeper spacings. In the Fifth Module, we have described LRT Tram STOP design and its types like Island Platform and Side Platform. The Module then covers components of Tram Stop such as shelter, walkways, ramps, steps, signages, lighting, Passenger Information, etc. It has also covered the Platform surface finish and Tactile. In the Sixth Module, we have described the Tram signal system, signal equipment, traction power system, distribution system, substation system and catenary system. Within the Tram Signal System, we have covered the switch machine, impedance bonds, loops and transponders, wheel detectors, axle counters, etc.
Read morePrimavera P6 is a globally recognised one the most effective tool to plan, manage and execute civil engineering projects. But getting training of Primavera doesn’t come for free, most of the time. That’s why we develop our courses for a very nominal fee, yes you heard it right. It's only $5.00 if you are our subscribed member and you will not only get access to Primavera Course but also to all our courses that shows a $0 fee. Primavera P6 can sometimes be a complex tool to understand if your basics of using the tool are not clear. That’s why we develop our Primavera Basic Course for you to clearly explain step by step process to develop a project program. We use real-world civil engineering project examples and develop the program so you can easily grasp it and correlate it with your real-world projects. And you can view them as many times as you want. In the first module, students will learn about the following topics -Launching Primavera P6, start-up window, drop-down menus, toolbars, sidebars, option settings, etc. Please click to see the Preview of the Course. The second module provides details of Enterprise Project Systems (EPS). Primavera is a cloud-based Project Planning tool and it saves the projects program of the enterprise in EPS. So, it's very important for students to know how to operate EPS and how to create a new EPS category for a new project. The third module provides details of setting up a new project within a new EPS category within Enterprise Project Systems (EPS). The module also covers the process of developing a Work Breakdown Structure (WBS) of a new project. This is the most important step of a project before assigning any activity. The fourth module provides a detailed process of creating activities of a project. We have developed a civil engineering project program, so the activities are developed for a civil engineering project. The fifth module provides a detailed process of setting up the calendar of the project. Primavera provides global and project-specific calendar options. It would be very useful to know when to use what type of calendar. The module also explains how to assign a calendar to a project. The sixth module explains the process of setting the layout page of the project program. It explains how to set the columns for activities, the Gant chart and the activity area. you can also customise the layout for a specific project or for a specific user. The seventh module covers the process of linking activities in three possible ways. It also provides details of predecessor and successor linking. The module also explains the linking process in a specific constraint situation and shows how that impacts the overall project duration. In the end, a high-level project program is created to demonstrate the whole process of project planning using Primavera P6.
Read moreMaking a perfect CV means focusing on micro details. Every letter, every corner, every information needs to be polished and presented to stand out from the crowd. Even if the information is the same in your CV and your competitor CV, but appearance makes them miles apart. Most people use Word to create their CVs. But the default word document doesn’t provide any features. So, they end up making a dull CV. Even after spending many hours, fitting additional features, colours, fonts, icons, the template doesn’t provide what they have imagined. So, what is the option? That’s what we do for you. So, get ready to open your wings to fly high in the sky Our CV builder provides plenty of customized CV templates to our students to build CVs as per their needs. The course module provides a detailed process of CV Building using GCE CV Builder Application. There are 27 professionally designed CV templates to publish the final CV. The course module provides step by step process to build your CV from the first step of filling personal information to education, work experiences, hard and soft skills, awards, recognitions, training, interest, references, template selection process and printing process. Please see the Free View of the Course for a quick flavour.
Read morePreparing structure drawing is one of the most tedious tasks, to say the least, and when the structure is highly complex with plenty of structure details, that adds further complexities for CAD Technicians and Engineers. That’s why we develop this course and address various stages and procedures to develop Structure drawings using AutoCAD. The first module covers Introduction to AutoCAD and its basic interface. The module also shares all the details of the menu, command windows, pop-down windows and other operational details. The second module covers the basic setting of AutoCAD, basic functions, and interfaces. The third module explains how to use various toolbars in AutoCAD. Some toolbars are very useful for structure drawing preparation. The fourth module explains how to develop an architecture plan and develop each component of the plan layout. The fifth module is the continuation of architecture plan development and structure details development. The sixth module explains how to place columns in the building plan layout and then how to develop column layouts and associated details in the drawing. The seventh module explains how to place beams within the building plan layout and how to develop beam layouts and associated details in the drawings. The eighth module explains how to develop the Slab Layout of the building plan layout. The ninth module covers the shuttering layout development. The module also covers the foundation layout development. The tenth module covers the reinforcement detailing the process of beams, columns and slabs.
Read moreSkill Improvement Leads to Employability:- GCE Evaluates & Provides a Detailed Performance Result.
At GCE, we provide course completion certificates of all courses. Our certificate comes with unique QR Code to validate it online & download it whenever needed.
We build your CV with professionally designed Resume Builder Application. Our Resume Builder is not just another resume creation tool; it is the finest tool to present your career graph.
Our mission is to provide professionally trained Civil Engineers for all type of civil engineering services....
Copyright © 2024 Gurukul of Civil Engineers | All Right Reserved | Design & Developed By Ntier Infotech India.